ThinkScan Plus S6 Car Code Diagnostic Scanner

4 System Diagnostic(ABS/SRS/Engine/TCM) Free For Life

5 Resets(Oil+SAS+EPB+TPMS+Throttle Adaptation) Free For Life

The remaining 23 Resets Function is 29.95/Reset/YEAR

If the reset function you selected doesn't support your car, please contact us to change it.

ThinkScan Plus S6 S5 Support 10 Languages

English,French,German,Spanish,Italian,Portuguese,Japanese,Russian,Polish,Turkish

ThinkScan Plus S6 S5 Support 10 Languages

English,French,German,Spanish,Italian,Portuguese,Japanese,Russian,Polish,Turkish

THINKSCAN PLUS S5 S6 Lifetime Free All Cars 4 Systems Diagnostic

This car obd2 scanner is capable of reading and clearing trouble codes of ABS/SRS/ECM/TCM/BCM Engine.

1.ABS Diagnosis:

By accessing to ABS system to view its Live Data Stream, and retrieving the fault codes, this scanner can troubleshoot the ABS issue with a visual inspection of all brake components that caused the warning light, and turn the light off.

2.SRS Diagnosis:

By detecting every electronic parameters in SRS system to check their health status, this diagnostic tool can address the SRS potential issues timely to ensure your driving safety, and turn off the warning light of Airbag.

3.ECM Diagnosis:

You can diagnose the engine system via ecu obd2 port, support all 10 OBDII test modes, such as live data, O2 sensor test, component test and more;read and clear the engine error codes, find out the exactly problem, repair it, and turn off the MIL engine light.

4.TCM Diagnosis:

AT is a set of transmission used to coordinate the engine speed and the actual speed of the wheel, which is used to give full play to the best performance of the engine.MUCAR CS4 obd2 scanner can read/clear codes and view live data retrieve the error information from AT.

ThinkScan Plus S5 S6 OB2 Scanner Supports Full OBD2 Test Modes:

1.Read Codes–Knows what and where the problem is according to the DTC and its definition.

1.Read Codes–Knows what and where the problem is according to the DTC and its definition.

2.Clear Codes– Clear/Erases the DTCs and turns off the warning lights after code reading and certain repairs.

3.Live Data–Show the information of continuous data stream from vehicle in live graphic display.

4.Smog Check–You can check if the various emission-related parts or systems on the vehicle are operating properly and make sure the monitors are ready for a smog test.

5.Freeze Frame–Request freeze frame information.

6.O2 Sensor Test–Show the last results of O2 sensor test in graphic display for troubleshooting.

7.Evap Test–Fuel Tank System (Carbon canister test), special control mode requests control of EVAP test.

8.On-board Monitor Test–Read the results of on-board diagnostic monitoring tests for specific components/systems.

9.DTC Code–Built-in DTC lookup library with cause analysis

10.Vehicle Information–Display the information such as VIN (Vehicle identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

THINKSCAN PLUS S6 Support 28 Reset Services, 5 Reset Functions(Oil+SAS+EPB+TPMS+Throttle Adaptation) Lifetime Free

1.Oil Lamp Reset Service
Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.

2.SAS Steering Angel Sensor Reset
Helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

3.EPB Electronic Park Brake Reset
It is important in the maintenance of electronic braking system's safety and efficiency.

4.TPMS Tire Pressure Monitoring System Reset
Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.

5.Throttle Adaptation
The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. In an electronically fuel injected car, a throttle position sensor and air flow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair.

NOTE:

If you need more special functions, you need to pay an additional $29.95 /year for a function.

If the reset function doesn't support your car, please contact us to change it.

Extra 23 Reset Functions, It Cost 29.95 USD/ year / reset function.

1.BAT battery service
Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.

2.DPF Diesel Particulate Filter Reset
Specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.

3.IMMO Key Programming
The unique car key programming and read pin code function, it is mainly used to disable the lost vehicle keys and program a new replacement key fob.

4.ABS Bleeding
ABS brake bleeding to get a firm brake pad after air exhaustion after repair ABS pump system.

5.Sunroof Reset
The sunroof needs to be reset when the sunroof control unit have communication problem or changed.

6.Suspension Reset
Try reset electronic suspension air ride with the massage system close all doors koeo flip through messages system go to suspension reset or on off.

7.Gearbox (Transmission )Reset
Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car.

8.AFS Headlamp Reset
'AFS' means Adaptive Front lighting System (at night with the Bi-Xenon headlights) it swivels either side, pressing that button means they stay pointing straight ahead and don't turn when you turn the steering wheel.

9.Injector Coding
Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off.

10.Gear Learning
The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.

11.EGR Reset
Reduce nitrogen oxides (NOx) in the exhaust gas and improve fuel economy at partial load.

12.A/F Reset
This function is applied to set or learn Air/Fuel ratio parameters.

13.Adblue Reset(Diesel Engine Exhaust Gas Filter)
After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset operation is required.

14.Airbag Reset
This function resets the airbag data to clear the airbag collision fault indicator.

25.Coolant Bleeding
Use this function to activate the electronic water pump before venting the cooling system.

16.AT Learning
This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problem. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift

17.Language Change
This function is used to change the system language of the vehicle central control panel.

18.Nox Sensor Reset
Nox sensor is a sensor used to detect the content of nitrogen oxides (Nox) in engine exhaust. lf the Nox fault is re-initialized and the Nox catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine Ecu.

19.ODO Meter Check:Only supports reading the current mileage of the car, does not support modifying the mileage

20.Stop/Start Reset
This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and supported by hardware).

21.Seat Calibration
This function is applied to match the seats with memory function that are replaced and repaired.

22.Transport Mode
ln order to reduce power consumption, the following functions may be disabled, including limiting the vehicle speed, not waking up the door opening network, and disabling the remote control key, etc.At this time, the transport mode needs to be deactivated to restore the vehicle to normal.

23.Windows Calibration
This feature is designed to perform door window matching to recover ECU initial memory, and recover the automatic ascending and descending function of power window.

Support 126+ Car Brands and 99% Vehicles

USA：
BXGM,CHRYSLER, AUSTFORD, GM,USAFORD

EUROPE:
ASTONMARTIN,AUDI,BENZ,BMW,BXFIAT,CITROEN,FERRARI,FIAT,GAZ,LANDROVER,MASE,RATI,OPEL,PAZ,PEUGEOT,PORSCHE…

Austrillia:
AUSTFORD,AUSTHOLDEN

Asia:
BAIC,CHANGAN,CHANGCHENG,CHANGHE,DAEWOO,DAIHATSU,DFXK,FLYER,FUTIAN,HAFEL HMAZDA,HONDA,HUACHEN,HYUNDAI,IKCO,INDIANMARUTI,INDIANTATA,ISUZU,IVECO.IZH,JACTY JIAO,JINLONG,JOYLONG,JPISUZU,KIA,LIFAN, LIUWEITY ,LUXGEN,MAHINDRA,MALAYSIA PERODUA,MALAYSIA PROTON,MARUT,MAXUS,MAZDA,MITSUBISHI…

Other Functions

Auto VIN
Online update
Diagnose report
Plug and play
Battery voltage test

Read Live Data Stream:Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

Packing List:

1*thinkscan plus S6 Host
1*Manual
1*Charging cable