Money-saving tips for EU buyers

For EU customers, please place an order from the Chinese warehouse, and we will ship from the EU warehouse, which is cheaper and faster!

What is the difference between the European version and the global version?

* EU Version: There are IP restrictions and can only be used in Europe.

* Global Version: No IP restrictions, can be used around the world

Must Read Before Buying

KINGBOLEN Company is one of the largest first-level agents of LAUNCH. We are the official LAUNCH authorized store, 100% Original.

LAUNCH X431 PRO3S+ ELITE Smartlink C V2.0 10.1'inch J2543 Programming All system Professional diagnostic tool, ECU Online Coding, Bi-directional Control, Active Test, Guide Topology, Map function for V.A.G, 37+ Reset Function, CANFD DOIP, AUTO AUTH FCA SWG, Android 10 system RAM 4GB+ ROM 64GB, 2 Years Free Update, Lifetime Free Use

LAUNCH X431 PRO3S+ Elite Smartlink C is with 2 Years One-Click Free Update, Lifetime Free USE

That mean after 2 Years , X431 PRO3S+ Elite still can work, it will not be lock, you can use it lifetime free !!!

LAUNCH X431 PRO3S+ Elite supports 24 kinds of Language :

Italian, English, Chinese Simplified, Chinese Traditional, German, Japanese, Russian, French, Spanish, Portuguese, Polish, Turkish, Dutch, Greek, Hungarian, Arabic, Danish, Korean, Persian , Romanian, Serbian, Finnish, Swedish, Czech

Warm TIP: The factory presets the language and the model software in English. After switching the language, customer needs to re-download the model software in the corresponding language.

LAUNCH X431 PRO3S+ Elite supports CAN FD and DOIP protocol , it supports For GM after 2020 and other New cars! Also Supports FCA AutoAuth !!!

CANFD

it is the only product in this price range that is compatible with CAN-FD protocol and supports the latest For GM vehicles manufactured after 2020. Adopts advanced CRC algorithms to accommodate more data from 8 to 64 bytes in the CAN frame, which runs faster than other products and reduces the risk of undetected errors to greatly enhance the user experience.

For Onix 2020-2024, For Tracker 2020-2024, For Suburban 2021-2024, For Tahoe 2021-2024, For Montana 2024, For Silverado 2024, For Electra E5 2024, For Escalade 2021-2024, For Escalade ESV 2021-2024, For Sierra 2024, For Yukon 2021-202.2/ 2024, For Yukon XL 2021-202.2/ 2024, and For Chrysler Models including For Grand For Cherokee (WL) 2021-20203, For Grand For Wagoneer 2022-2024

DOIP

With Diagnostics over DoIP, diagnostics introduced over UDS are used over TCP/ IP and Ethernet. This enables much higher data rates than with CAN. That makes LAUNCH X431 PRO3S+ Elite SmartLink C HD save both in terms of time and expenses in the case of complex diagnostic tasks and flash applications. Compatible with For BMW (F&G chassis), For Volvo models (2018 later), For Land Rover & For Jaguar models (2017 later).

( Note: this is car list that CANFD and DIOP supports, X431 PRO3S+ SmartLink C HD also supports other cars, more than about 100+ brands, like for bmw, for vw, for ford etc, there has the detailed car list in the following description, you can check ）

FCA/ SGW AutoAuth:

FCA SGW Access: For the 2018+ FCA vehicles (For Fiat, For Chrysler, For Jeep, For Alfa Romeo, etc.) equipped with the Security Gateway module, the LAUNCH X431 PRO3+ Elite Smartlink C V2.0 car scanner can help you to log in to the FCA account and perform diagnostic functions such as clearing DTCs, bi-directional tests, and calibrations.

For Renault SGW Access: Serve 2019+ For Renault SGW vehicles include for CLIO V, for CAPTUR II, for CAPTUR II CN, for MEGANE IV ph2, for ESPACE V ph2, for TALISMAN/SM6 ph2, for NEW ZOE, for ARKANA CN, for XM3/ NEW ARKANA, for NEW SANDERO/ LOGAN, etc. Unloking security gateway to perform service function, active test, coding, programming, etc.

Note: This Function need have the account in FCA Website first .

LAUNCH X431 PRO3S+ ELITE Smartlink C Added Functions: Topology Map, improving your working efficiency highest than ever

* Introducing the revolutionary function of topology mapping in automotive diagnostic products! Say goodbye to guesswork and hello to precision with our advanced technology that allows you to easily identify and locate faults in your vehicle's electrical system. With topology mapping, you can quickly and accurately diagnose issues, saving you time and money on costly repairs.

* Our cutting-edge diagnostic tools provide a comprehensive view of your vehicle's electrical system, giving you a detailed map of all the components and their connections. This allows you to quickly pinpoint any faults and troubleshoot with ease. Whether you're a professional mechanic or a DIY enthusiast, our topology mapping feature is a game-changer that will take your diagnostic capabilities to the next level.

* Don't settle for outdated diagnostic tools that leave you guessing. Upgrade to our topology mapping technology and experience the future of automotive diagnostics today. With our products, you'll have the power to diagnose and fix problems with confidence, ensuring your vehicle runs smoothly and efficiently. Try it now and see the difference for yourself!

LAUNCH X431 PRO3S+ Elite SmartLink C supports J2534 ECU Programming & ECU Online Coding, Up Your Business To Higher Level !

For repair shops that tend to expand your businesses to high-end vehicle models like for Benz, for BMW, for Porsche, this LAUNCH scanner X431 PRO3S+ Elite Smartlink C will make your plans come true

LAUNCH auto scanner X431 PRO3S+ Elite work with Smartlink C V2.0 (J2534 compliant) empowers you to conduct J2534 ECU Programming, just by downloading the OEM software in Automakers’ Service Webs to show the OE-level programming.

What can this J2534 Programming Function do for you?

1) Operate OEM programming without using the OEM tools
2) Replace ECUs: program blank ECUs
3) Write-in Data: refresh used ECUs
4) Repair missing ECU information
5) Upgrade ECU software version

LAUNCH X431 PRO3S+ Elite Smartlink C Supports Active Test & Bi-directional control

Bi-Directional Control capability and is capable of performing Active Tests to access vehicle-specific subsystems and component tests. The tester outputs commands to the ECU to drive the actuators in order to determine the integrity of the system or parts by reading the ECU data, or by monitoring the operation of the actuators.

For example, LAUNCH X431 PRO3S+ Elite Smartlink C have the ability to actuate relays, injectors, coils, or perform system tests, etc. Also it will actuate solenoids valve and actuators for active testing to identify the error easily moreover. The bidirectional functions are quite extensive. even open an e.g.r. valve and seeing the difference in idle response and oxygen sensor voltage.

Please note: Active tests are NOT universal for all vehicles, check compatibility with VIN number before purchase. Active tests vary depending on the manufacturer, year, and model, and only the available tests display in the menu.

Advanced ECU Coding

Serving as an upper-level function that not only creates the vehicle’s potential but also increases your profits. These automatic functions save us work & time and allow us to concentrate on our driving experience mostly.

1) Component Matching: Match the ECU modules after changing and replacement.
2) Flash Hidden Functions: Activate advanced functions or Disable Vehicle Functions: like Deactivating the Start/ Stop Function; Beeping When Unlocking and Locking; Seatbelt Warning Sounds; Mirrors Automatically Folding and Unfolding; and more.
3) Online ECU Coding: Allow you to get more online ECU data from the OEM server, making coding easier and more accurate. Designed for VW, for Audi, for BMW, for Porsche, etc.

LAUNCH X431 PRO3S+ ELITE support all Systems Diagnostic Tool (Faster and more effective than OE-level coverage diagnostic equipment）

The Full Systems of the car mainly including Drive System, Chassis System, Body System, Electrical system :

1. PCM (Drive System): Engine, Transmission, Transfer case, Electrical Machine Electronics, Fuel Pump, Gear, and more…

2. Chassis System: Accumulator Management Electronics, Steering, Integrated Chassis Management, Tyre Pressure Control, Active Cruise Control, Braking System, Suspension, TPMS and more…

3. BCM (Body System): SRS Airbag, Camera, Audio Radio, Gateway, Cluster Dashboard, Rain Sensors, Charging Interface Module, Parking Assistance, Power Control Unit, Touch box, Light, Battery Charging System, Head up Display, Wipe Control System, Roof, Seat & Door Motor system, Immobilizer, ABS ESP system, Air Condition. Electric Windows, Telephone, and more…

4. Electrical System: Including Centralized control system for engine and power transmission, Chassis integrated control and safety system, Intelligent body electronic system, Communication and information / entertainment system.

It supports the detailed Function :

— read fault codes: read and decode the DTCs to identify where the fault location is;
— clear fault codes: erase the DTCs to turn off the MIL after repairs;
–retrieve ecu information: allows you to retrieve vehicle information;
— Graph live data stream: view the dynamic data stream to determine vehicle condition
— ECU Coding : Match, learn, or code the new ECU; Customize your car, unfold the hidden features, or disable the annoying functions; Reprograms the adaptive data for certain components after repairs.
— Active Test (Bi-directionnal Control): Actuate solenoids and actuators for active testing, send commands to systems/ components to test their working status, without using the vehicle controls.

With the Diagnose Function , you can enhance performance, save energy, reduce emissions and more as following:

For Engine: detect common issues as Poor lubrication, Failing oil pump, Oil deposits and debris, Inadequate fuel and air compression, Leaking engine coolant, Blocked engine radiators, Prolonged engine detonation, Damaged oxygen sensors, Aged spark plugs, etc.

For SRS: pinpoint the trouble area as: a bad seat belt, a corroded crash sensor, or some water intrusion in a connector, etc.

For ABS: diagnose Blown sensor fuse, Low brake fluids, and Faulty sensor, etc.

For Transmission: avoid Grinding or shaking sensation in gear, Whining, humming or clunking noises, Burning smells, Gears Slipping, Low or Leaking Transmission Fluid, etc.

For TPMS: verify problems of Low tire pressure, Faulty in tire pressure monitor control module, Unknown tire sensor, Failure to identify tire sensor, etc.

LAUNCH X431 PRO3S+ ELITE Smartlink C Supports Guided Function for Volkswagen/ for Audi, the following function need Guided Function:

√ Service Regeneration,Particle Filter (DPF)
√ Adapt Injector Correction Value
√ Reset Engine Control Adaptation Values
√ Throttle Learning
√ Fill Coolant Circuit
√ Adapt Values, SCR system
√ Activating/ Deactivating Cruise Control System
√ Basic Setting Of Transmission
√ Basic Setting of Sensors (-G85/ -G200/ -G201/ -G251)
√ Basic Setting/ Bleeding Brake System
√ Initial A/C Compressor Run-In
√ Adaptation Automatic Locking At 15 km/h
√ Distance Control System Calibration
√ Deactivate Or Activate Airbags And Belt Tensioners
√ Adaptation Menu Key Multifunction Steering Wheel
√ Adapting Service Intervals
√ Service Interval Display, Resetting
√ Transport Mode, Switching Off/ On
√ Level Control System Basic Settings
√ Brake Pad Change
√ Headlight Beam Adjustment
√ Battery Adaptation
√ Rear View Camera System Calibration
√ Driver Assistance Systems Front Sensor System Calibration etc.

LAUNCH X431 PRO3S+ Elite Smartlink C Supports 37+ Special Reset Service Functions

( pls note different reset function supports different cars , also supports some cars, not for all cars, pls contact us check the detailed car list , you also can check in the link directly: //qcar.x431.com/qcar/#/pc/index?q=eyJsYW4iOiIxMDAyIn0%3D ）

1> Oil Reset Service

This function enables you to reset the oil service for the engine oil life system, which calculates an optimal oil life change interval depending on the vehicle driving conditions and weather events.

lt needs to be performed in the following cases:
1. lf the service lamp is on, run car diagnostics first for troubleshooting. After that, reset the driving mileage or driving time, so as to turn off the servicelamp and enable a new driving cycle.

2. lf the service lamp is not on, but you have changed the engine oil or electric appliances that monitor oil life, you need to reset the service lamp.

2> Electronic Parking Brake Reset

This function enables you to reset the brake pad after replacing the brake pad. lt needs to be performed in the following cases:
1. The brake pad and brake pad wear sensor are replaced.
2. The brake pad indicator lamp is on.
3. The brake pad sensor circuit is short, which is recovered.4.The servo motor is replaced.

3> Steering Angle Calibration

This function enables you to reset the steering angle, after replacing the steering angle position sensor, replacing steering mechanical parts (such as steering gearbox, steering column, end tie rod, steering knuckie), performing four-wheel alignment, or recovering car body.

To reset the steering angle, first find the relative zero point position for thecar to drive in straight line. Taking this position as reference, the ECU can calculate the accurate angle for left and right steering.

4> ABS Bleeding

This function allows you to perform various bi-directional tests to check the operating conditions of Anti-lock Braking System (ABS).

lt needs to be performed in the following cases:
1. When the ABS contains air.
2. When the ABS computer, ABS pump, brake master cylinder, brake cylinder, brake line, or brake fluid is replaced.

5> Gear Learning

This function enables you to perform tooth learning for the car, to turn off the MIL.

lt needs to be performed in the following cases:
1. After the engine ECu, crankshaft position sensor, or crankshaft flywheel is replaced.
2. The DTC 'tooth not learned' is present.

6> IMMo Service

This function enables you to perform the anti-theft key matching function, so that the immobilizer control system on the car identifies and authorizes remote control keys to normally use the car.

lt needs to be performed in the following cases:
When the ignition switch key, ignition switch, combined instrument panel, ECU, BCM, or remote control battery is replaced.

7> Injector Coding

This function enables you to write injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder，so as to more accurately control or correct cylinder injection quantity.

lt needs to be performed in the following cases:
After the ECu or injector is replaced.

8> Battery Maintenance System Reset

This function enables you to perform a resetting operation on the monitoring unit of vehicle battery, in which the original low battery fault information will be cleared and battery matching will be done.

lt needs to be performed in the following cases:
1. The main battery is replaced.
2. The battery monitoring sensor is replaced.

9> Diesel Particulate Filter (DPF) Regeneration

This function enables you to clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode (such as high temperature heating combustion, fuel additive or catalyst reduce PM ignition combustion) to stabilize the filter performance.

lt needs to be performed in the following cases:
1. The exhaust back pressure sensor is replaced.
2. The PM trap is removed or replaced.
3. The fuel additive nozzle is removed or replaced.
4. The catalytic oxidizer is removed or replaced.
5. The DPF regeneration MlL is on and maintenance is performed.
6. The DPF regeneration control module is replaced.

10> Electronic Throttle Position Reset

This function enables you to make initial settings to throttle actuators and returns the learned values stored on ECU to the default state. Doing so can accurately control the actions of regulating throttle (or idle engine) to adjust theamount of air intake.

11> Gearbox Matching

This function enables you to complete the gearbox self-learning to improve gear shifting quality.

lt needs to be performed in the following cases: When the gearbox is disassembled or repaired.

12> AFS (Adaptive Front-lighting System) Reset

This function enables you to initialize the adaptive headlamp system.

13> Sunroof Initialization

This function enables you to set the sunroof lock off, closed when it rains, sliding/ tilting sunroof memory function, temperature threshold outside the caretc.

14> Suspension Calibration

This function enables you to adjust the height of the body.
lt needs to be performed in the following cases:

1. When replacing the body height sensor, or control module in the air suspension system.
2. When the vehicle height is incorrect.

15> EGR Adaption

This function is used to learn the EGR (Exhaust Gas Recirculation) valve after it is cleaned or replaced.

16> Seats Calibration

This function is applied to match the seats with memory function that are replaced and repaired.

17> Tyre Reset

This function is used to set the size parameters of the modified or replacedtire.

18> Coolant Bleed

Use this function to activate the electric water pump before venting the cooling system.

19> AdBlue Reset (Diesel Engine Exhaust Gas Filter)

After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset operation is required.

20> NOx Sensor Reset

NOx sensor is a sensor used to detect the content of nitrogen oxides (NOx) inengine exhaust. lf the NOx fault is re-initialized and the NOx catalytic converter is replaced, it is necessary to reset the catalytic converter learned value storedin the engine ECu.

21> AC System Initialization

AC system relearn/ initialization must be performed when the vehicle AC ECUador actuator is replaced or the ECu memory is lost.

22> High Voltage Battery Detection

This function is used for high voltage battery diagnosis and status information detection.

23> Windows Calibration
This function is used to perform door window matching to recover the ECu initial memory, and recover the automatic ascending and descending function of power window.

24> Language Change
This function is used to change system language of vehicle center console.

25> AF Reset
This function is applied to set or learn airlfuel rate parameters.

26> Transport Mode
To lower vehicle power consumption, user may perform the following operations: limit vehicle speed, not wake up the network for door open and disable remote key etc. In this case, deactivating transport mode is needed torecover vehicle being normal.

27> Stopl Start Reset
This function is used to open or close the automatic Start Stop function via setting the hidden function in ECU (The precondition is vehicle equipped with hidden function and hardware support).

28> Intelligent Cruise Control System Reset
This function is used to matching the intelligent cruise control module after it is replaced or repaired.

29> Engine Power Balance Monitoring
This function is used to monitor crankshaft acceleration in the power stroke of each cylinder, to determine the relative power provided by each cylinder.

30> Gas Particulate Filter (GPF) Regeneration
This function is used to perform the GPF replacement or regeneration after the fuel consumption is increased and engine output power is reduced resulting from a long time service of the GPF.

31> Motor Angle Calibration
This function is used to perform the motor angle calibration when the rotor position detected by the motor angle position sensor is different from the actual rotor field position.

Will continue to update…….

LAUNCH X431 PRO3S+ Elite Smartlink C Other Function

Aut VIN Scan: VIN scan quick test and manual diagnosis are available. support all system diagnosis of passenger car

Remote Diagnosis: help repair shops or technicians launch instant messaging and remote diagnosis, making the repair job getting fixed faster. If you encounter a diagnostic problem that can not be solved by yourself, you can ask assistance for professional Mechanic.

Vehicle Health Report Share and Print: Auto generate vehicle health report, and it can be shared via email, then print it on computer.

Diagnostic Feedback: If you the scanner can not scan any car system or functions does not support, you can submit diagnostic feedback, then send serial number to us, we will deal the case soon.

Data Review: It allows you playback the stored data and diagnostic process, help customer compare current and past data.

Online Database: is fully filled with abundant repair cases (Circuit diagram / maintenance handbook) and automotive technology handbook for your easier retrieval and reference.

LAUNCH X431 PRO3S+ Elite SmartLink C Supports car list

Supports 10000+ car models from America, Europe, Asia (Including Russian car models, Chinese car models, Indian car models, Malaysian car models, Australian car models, Brazilian car models, Latin American car models and other national models, including cars, SUVs, minvans, 12V light-duty trucks, gasoline cars and diesel cars.

European Cars:

For Audi, For Mercedes-Benz, For Maybach, For BMW, For Mini, For HCBMW, For Rollsroyce, For Citroen, For Fukang, For Ferrari, For Fiat, For Abbas, For Lancia, For Romeo, For NanjingFiat, For GAZ, For LandRover, For Jaguar, For Martha Lahti, For Open, For GMSA, For Vauxhall, For Peugeot, For DF Peugeot, For Porsche, For Renault, For Dacia, For Rover, For SAAB, For Skoda, For Seat, For Smart, For Transporter & V-Class, For VAZ, For Volvo, For VW, For Bingley, For Bugatti
more…..

America Cars :

For Brazil Fiat, For Brazil GM, For Chrysler, For Dodge, For Jeep, For GM, For Buick, For Cadillac, For Chevrolet, For Ford, For Ford (China), For Lincoln, For Ford European
more…..

Asian Cars:

For Daewoo, For Daihatsu, For Honda, For Acura, For Honda DF, For Honda GZ, For Hyundai, For Ikco, For India Mahindra, For India Maruti, For India Tata, For JPIsuzu, For TLIsuzu, For Kia, For Luxgen, For Mahindra, For Malaysia Asia Pacific Perodua, For Malaysia Asia Pacific Proton, For Maruti, For Mazda, For YQMazda, For Mitsubishi, For Nissan, For Infiniti, For DFNissan, For Perodua, For Proton, For SAIPA, For Ssangyong, For Subaru, For Suzuki, For TATA, For Toyota, For Lexus, For Toyota TJ
more…..

Australian Cars:

For Australia Ford, For Australia Horton
more…..

For Chang'an, For ChangCheng, For Chenghe, For DR automotive, For ECUADI, For BYD, For Foton, For Hafei, For Haima, For Brilliance, For Jiangling, For Iveco, For Jac JAC refine general, For Gonow Auto, For Xiamen Golden, For Kowloon, For Lifan auto, For GSMW, For SAIC Chase, For MVW Automotive, For Chery, For SAIC and MG, For SGM, For CHCHEVROLET, For CHBuick, For CHCadillac, For Tianjin FAW, For XinKai, For ZhongShun, For ZOTYE, For Zhongxing
more….

LAUNCH X431 PRO3S+ Elite SmartLink C diagnostic scanner has supported various extended modules (needs to buy additionally)

24V HD Heavy Duty Trucks:

need order the truck software and connector first, then active, it can work with 24V Truck

LAUNCH X431 ADAS TOOL:

For ADAS Calibration functions , Advanced Driver Assistance System (ADAS) is an electronic component in a vehicle, including various safety functions of the vehicle, such as automatic emergency braking (AEB), lane departure warning (LDW), lane keeping assist, blind spot elimination, night vision camera and Adaptive lighting. (NOTE: Need to be purchased separately)

LAUNCH X431 I-TPMS:

TPMS activation, programming and learning function.
a) Activation: to activate the sensor's IlD, wheel pressure, sensor frequency, tire temperature and battery status.

b) Programming:to program sensor data to a blank LAUNCH sensor, so as to replace a sensor that is in low battery and does not function properly. There are three sensor programming methods available: automatic, manual, and via activation replication.

c) Learning:to write the sensor ID into the vehicle ECU for sensor identification.

LAUNCH X431 X-prog 3:

Features of LAUNCH X431 PRO3S+ car key programmer go beyond any other scan tools you’ll find at the same level. This LAUNCH X431 diagnostic tool can also be a capable IMMO service tool, providing fast, easy, and intuitive k-ey programming for VAG group vehicles with 2/3/3.5 gen. IMMO, and most Asian cars with low-level antitheft systems.

LAUNCH X431 X-prog 3:

Features of LAUNCH X431 PRO3S+ car key programmer go beyond any other scan tools you’ll find at the same level. This LAUNCH X431 diagnostic tool can also be a capable IMMO service tool, providing fast, easy, and intuitive k-ey programming for VAG group vehicles with 2/3/3.5 gen. IMMO, and most Asian cars with low-level antitheft systems.

Add Key, Delete Key, Read Pin Code (All K-eys Lost), and more.
Need to pair with LAUNCH X431-PROG3 IMMO Programming box to have complete IMMO & K-ey Programming (read & wirte 1200+ EEPROM and MCU chips, etc.) for VW/Audi/Skoda/Seat models manufactured after 2008 with 4/5/5.5/6 gen. IMMO system.
NOT universally compatible. Reach us to check car coverage if necessary.

LAUNCH VSP-600 VIDEOSCOPE

Check unseen parts of engine, fuel tank system, etc.

X431 BST-360 Battery tester

it supports Battery Health Test, Smart System Test , Charging Health Test and Test Record

X431 New Energy Battery Pack:

Supports reading the current SOC/ SOH, cell/ module voltage, input/ output current and power, battery temperature, as well as reading the detailed status information and fault information of the battery pack, automatically calculating the total voltage, voltage difference, maximum/ minimum voltage and other index data, automatically labeling the abnormal data, and quickly locating the battery pack problems for more than 130 + New energy vehicles, include BMS_For BYD, BMS_HD_For BENZ, EV_For AUDI, EV_For BMW, EV_For CHRYSLER, EV_For GM, EV_HD_For CAMC, EV_HD_For GEELY, EV_HD_For VOLVO, EV_For HONDA, EV_For TOYOTA, EV_For TESLA, EV_For RENAULT, etc

X431 S2-2 Sensorbox

Specially designed to diagnose and simulator vehicle sensor faults quickly and conveniently. (Need extra pay)

S2-2 Multimeter

Allows you to measure the physical parameters such as voltage, resistance, frequency etc. It utilizes the same hardware as the S2-2 Sensorbox. (Need extra pay)

X431 wifi PRINTER

Print out diagnostic data/ reports

X431 Scopebox : Quickly acquire the circuit signal, and slowly display the waveform for better data analysis. (Need extra pay)

LAUNCH X431 PRO3S+ Elite Smartlink C parameter:

Operating System: Android 10 OS

CPU: 2.0GHz 4 core

Screen Size: 10.1 inch 1280*800 FHD IPS Touch Screen

Battery: 6300mAH 7.6V

Memory: 4GB+64GB

Camera: Rear 8.0MP

WIFI: 2.4GHz & 5GHz Dual-Frequency Wi-Fi, 4X faster transmission rate

Working Speed: 8X Faster AUTO VIN Technology, Time is Money!

Work Temperature : 0℃～50℃

LAUNCH X431 PRO3S+ Elite Packing List

1PC * X-431 PRO3S+ ELITE Tablet
1PC * Smartlink C
1PC * US Plug
1PC * UK Plug
1PC * EU Plug
1PC * HD15F to OBD2 16 Connector
1PC * Type A – Type B USB Cable
1PC * Type A -Type C USB Cable
1PC * Network cable
1PC * PIN Envelope
1PC * Quike Start Guide
1PC * User Manual
1PC * BZ-38
1PC * B-20
1PC * HDA-3
1PC * TYA-17
1PC * GV-17
1PC * TYA-22
1PC * CHR-6
1PC * KA-20
1PC * BZ-14
1PC * FD 6+1
1PC * NA-14+16
1PC * Cigarette lighter
1PC * MH 12+16
1PC * Power cable clips
1 Pack * Fuse

Non-16pin Box Set Packing List (Please purchase according to your needs)

1PC * NON- 16PIN Adapter Box
1PC * For Benz-38 diagnostic connector
1PC * For Benz-14 diagnostic connector
1PC * For BMW-20 diagnostic connector
1PC * For Ford 6+1 diagnostic connector
1PC * For Toyota -17 diagnostic connector
1PC * For Toyota -22 diagnostic connector
1PC * For Honda-3 diagnostic connector
1PC * For Kia-20 diagnostic connector
1PC * For Chrysler-6 diagnostic connector
1PC * For Nissan 14+16 diagnostic connector
1PC * For Mitsubishi Hyundai 12+16 diagnostic connector
1PC * For GM VAZ-12diagnostic connector
1PC * Double clip power cord
1PC * fuse
1PC * Parts List paper
1PC * Cigarette lighter