LAUNCH X431 Creader ELITE 2.0 BBA FGC Car Diagnostic Tool Auto OBD OBD2 Scanner All System ECU Coding Bi-Directional Free Update

LAUNCH X431 CRE 2.0 BBA Support Car Brands

Support for BENZ Series, for BMW Series, for AUDI Series,for Maybach, for SPRINTER, for Rolls Royce, for Volkswagen, for Bentley, for Skoda, for Bugatti, for Lamborghini, for SEAT, for Volkswagen Business

LAUNCH X431 CRE 2.0 FGC Support Car Brands

for Ford,for Gm,for Chrysler,for Buick, for Cadillac, for Chevrolet, for Dodge

Buy LAUNCH Creader Elite , Enjoy X431 V function

1. OE-Level Professional Car Full System Diagnosis

2. Full Bi-Directional Control ( Active Test ) + ECU Coding

3. Support 31 More Reset Service , Keep increasing

4. Lifetime Free Update via Wifi

5. 11 Language Free Choose: 1. English 2. Traditional Chinese 3. Spanish 4. French 5. German 6. Italian 7. Russian 8. Portuguese 9. Japanese 10. Korean 11. Polish

6. Support Auto VIN Scan + Remote Diagnostics + Diagnostic Feedback

7. 5 Year Warranty for any Quality Problems and Lifetime Free Tech Support

and more functions ..

OE-Level Full System Diagnostic

LAUNCH X431 Elite can establish a data link to all systems and subsystems of the vehicle being serviced to:

Read all DTC types for full system, view, graph and record data PIDs, support bi-directional controls, actuation test and all other diagnostic functions.

Displays live data in text, graph for easy data review and analysis, record and playbacks live data to pinpoint troubles of sensors and components.

The following is a list of modern vehicle systems that this scan tool can get access to:

-Engines / Auto Transmission / Airbags / Immobilizer / Key Coding / ABS / Cruise Control / Instruments / Self Leveling Suspension systems

-Seats / Doors / Gateway / Steering Angle / Air Suspension / Body Systems / Electronic Power Steering & Motor Assisted / Power Steering / Tyre Pressure / Rain Sensors / 4WD System

-Stabilizer / Intelligent Parking Assist/Door Motors / Audio Systems / Air Conditioning / Tiptronic / Anti Theft / Soft Top / Headlamp Leveling / Central Locking / Automatic Clutch / DPF Reset

-Electric Windows / Plip Programming / Heated Rear Window / Xenon Headlights / Wash Wipe / Fuel Burning Heater / Transfer Box / Seat Memory / Oil Life Service Reset / Sliding Doors / Electronic Throttle

-Navigation System / Rollover Sensor / Cruise Control / Multi Function Steering Wheel / Aux Heating / Electronic Parking Brake / Clutch Electronics … and more.

This comprehensive scanning process is able to locate the faulty systems and retrieve the DTCs related easily. So you can work on all parts of the vehicle systems to enhance the performance, save energy, reduce emissions, and everything else.

Bi-directional Control(Active Test)

The scanner allows you to activate or control a vehicle system or component, it can send commands to the ECU, read ECU data to determine the integrity of the system or component, and monitor the operation of the components, letting you quickly understand whether a specific system, component or subsystem is operating normally,such as turn on the radiator fan, open/close windows, operate mirrors, etc.

Advanced ECU Coding

It allows you to recode adaptive data for certain components after making repairs or replacements, and make the ECU recognize the replaced part. Access the ECU to make full use of the hidden features or disable the car’s annoying functions, like parking assistant, A/C, and activating the auto side mirrors folding function.

✔️ECU Coding: Reflash the vehicle control modules, it allows you to reprogram adap.tive data for certain components after making repairs or replacements, such as fit for BMW ( E/F chassis) coding.

✔️Offline ECU coding: Compatible with Benz, for BMW（E/F chassis）and more. Read the code from the original ECU module, and then write the code to the new ECU module.

✔️ECU Replacement: Recode/reset/match/initia.lize ad.aptive data for certain components after replacing modules.

✔️Refresh the Hidden Features: Activate the hidden features or disable the annoying features, such as changing the interior l.ight, activating cornering headl.ights with fog l.ights, and deactivating buzzing sounds etc.

✔️Customize Individual Customization: Set up functions only available in high-end vehicles, such as adaptive cruise holding system, vehicle positioning, etc.

ALL Reset Service

click car diagnostic software to do reset service , please note : reset service is not for all model , if you are not sure , please offer “Car brand ,model and release ” to seller to check it for you

ABS Bleeding: When the ABS contains a.ir, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity
Oil Reset: Close the oil service light, reset service mileage & service interval after replacing the engine oil, and the next maintenance calculation cycle is entered.

Battery Registration: With the power battery system management system, when a car battery is replaced and needs to be re-matched, it enables the car computer to recognize the new battery. (Note: Batteries of the same type and capacity are supported, as well as batteries of different types and different capacities.)

Injector Coding: The engine injector has a code. After replacement, you need to write a new code into the computer so that the car computer can correctly identify the injector.

TPMS Reset: When replacing TPMS sensors or the signal from the sensor is lost it can quickly look up the tire sensor from the vehicle’s ECU, reset tire pressure and turn off the tire pressure MIL

Gear Learning : The vehicle has a crankshaft position sensor. This sensor collects the 58-tooth signal of the flywheel to determine the top dead center ignition time of a cylinder (reference signal). If this sensor is replaced, the reference will be lost, and gear signal learning is necessary.

E.P.B Reset (Electronic Parking Brake Reset) : After replacing the brake pads, you need to reset the position of the brake pads before installing the new brake pads to close the warning light.

Throttle Calibration: A throttle position sensor is a sensor used to monitor the a.ir intake of an engine, which provides the ECU with information on whether the throttle is in the idle position, wide-open throttle (WOT) position, or somewhere in between these extremes. After the throttle is cleaned, the throttle opening needs to be re-adjusted to improve vehicle performance.

D.P.F. Reset: Clear diesel particles from the filter through oxidation or combustion to stabilize the filter performance.——————————-

-More Hot Service Functions: 9. Clutch reset, 10. Gearbox adaptation, 11. Headlight initialization, 12. Crank sensor releam, 13. Power window initialization, 14. Power window regulators initialization, 15. Slide sunroof initialization, 16. Automatic engine start-stop, 17. Automatic tailgate actuation initialisation, 18. Delete transport mode, 19.Reset service interval indicator, 20. Calibrating and teaching system for all-round vision camera, 21.Fuel injector adaptation, 22. Fuel system Bleeding, 23. Fuel consumption display, 24.Brake bleeding procedure, 25. Rain sensor initialization, 26. Rain-light-solar-condensations sensor Initialisation, 27. Learn sensor zero point, 28. A/C compressor initialization, 29. EWS-DME/DDE adjustment, 30. SAS reset, 31. Injector rate adjustment, 32. Windscreen wipers-Installation position, 33.CAS reset, 34. Calibration of lane departure warning, 35. Change emergency number, 36. Air-suspension height calibration , 37.Fuel pressure test, 38. Idle correction, 39.Initialise Front wipers, 40. Initialize FlexRay, 41. Initialized telematics services, 42. Learn Valvetronic Limit Positions, 43. Line Short Circuit Of FRM Reset, 44. Start-up of active steering, 45. Activate Bluetooth and emergency call, 46. Learn pressure sensors, 47.Start-up of ACC sensor, 48. CO adjustment, 49.Reset adaptations, and etc. More Reset Function Continuously growing with updates…

Auto VIN Scan

diagnostic system features the latest VIN-Based Auto VIN Scan function to identify vehicles and scan all the diagnosable ECUs and run diagnostics on your selected system.

✔️ Manual VIN Input：If the vehicles not supporting the Auto VIN Scan, you may manually enter the vehicle VIN.

✔️ Automatic Selection：The Auto VIN Scan can be selected after selecting the test vehicle manufacturer.

✔️ Manual Selection：When the vehicle's VIN is not automatically retrievable through the vehicle's ECU, or the specific VIN is unknown, the vehicle can be manually selected.

DTC Lookup & Code Search

Supports fault code inquiry function and re-view the recorded fault codes,helps you quickly find and understand code definitions.

4-in-1 LIve Data

This function retrieves and displays live data and parameters from the vehicle's ECU. A pull-down list of the data stream items will appears on the screen. Select the necessary items (Max. 4 items can be selected at the same time) and the screen will display the waveforms corresponding to these items immediately.

Battery Voltage Test

LAUNCH x431 elite obd2 scanner for Mercedes, for Benz is an excellent ba-ttery registration tool! It supports 3 types of ba-ttery replacement: 1.the same battery type and capacity. 2.the same battery type, but different capacity. 3.different battery type (Exclusive) — It is the only one scanner on the market to support ba-ttery replacement of different battery types. Connecting your car, go to: Diagnose> Automatically Search >Special Functions> Register ba-ttery replacement.

Online Diagnostic Feedback

Launch scanner provides you with a feed-back function to share any problems you encounter in the process of diagnosis. we will make every effort to perform a no-delay problem solving and makes improvements on product quality according to your problems and suggestions, thus offering you a higher quality user experience.

Diagnostic Report Share & Print

This bidirectional diagnostic tool fit for mercedes benz enables diagnostic technicians to generate diagnostic reports before and after car diagnosis and repair service, so that the diagnostic reports can be printed out or sent to customers through the Internet and compared or shared with customers.

LAUNCH X431 BBA/FGC tablet configuration

■Screen size: 3.97 inches 800*480
■ CPU: 1.3G HZ 4 cores
■ Android version: 8.1
■ Battery capacity: 3000mAh
■ Package size:76*175*250 (mm)
■Main line length: about 117cm
■ USB length: TYPE C interface, about 73.5cm
■ Running memory: 2G
■ Storage size: 16GB
■ WIFI frequency: 2.4G HZ
■ Upgrade method: wifi upgrade
■ Total product weight: <540G
■ Charging power: 5V 1.5A (7.5W)
■ Example diagram of the new version: vertical screen to horizontal screen