British Pound Sterling (£)
Canadian Dollar (CA$)
Euro (€)
Nigerian Naira (₦)
US Dollar ($)
2025 LAUNCH Creader Elite V2.0 Bi-Directional Scan Tool, All Reset Functions, Full System Diagnostic Scanner, Full OBD2 Code Reader, ECU Coding, AUTO VIN, Lifetime Free Update
1.Poweful Bi-Directional Control: Precisely Locate the Issue to Reduce your Unnecessary Maintenance Costs.
2.ECU Coding: Allow you to code your vehicles yourself, customize it according to your wishes and unlock hidden features.
3.Full System: It can access all systems Including ENG/ABS/SAS/SRS/TPMS/EPB/I=M=M=O/BMS/Fuel Systems etc.
4.Full Reset Services: There are 30+ reset in each related System Diagnosis with Lifetime software update. if you enter the “Diagnose”> Automatically Search> Special Function.*Note:Special functions are vary from vehicle models.
5.Full OBD2 Modes: The Lanuch Creader Elite Scan Tool can diagnostic Full OBD 10 modes on global OBDI/OBDII/EOBD to Read, clear codes, turn off MILs, requests and records live sensor data, displays freeze frame data etc.
Support language
1. English 2. Traditional Chinese 3. Spanish 4. French 5. German 6. Italian 7. Russian 8. Portuguese 9. Japanese 10. Korean 11. Polish
Full system diagnosis
It can fully detect all systems for Hyundai and Kia vehicles, including but not limited to the engine (ENG), automatic transmission (AT), ABS, airbag (SRS), body control module (BCM), air conditioning system, suspension system, etc., providing in-depth fault detection and repair suggestions.
Bi-directional control
With bi-directional communication capabilities, this diagnostic tool can not only read vehicle data, but also send commands to the vehicle and perform active tests (such as performing component action tests, system function checks, etc.), which is particularly important for certain complex diagnostic and repair tasks.
Advanced ECU Coding
With ECU coding, you can personalize your car's functions to make your driving experience more tailored to your personal needs!
The LAUNCH X431 Elite for HYUNDAI AND KIA OBD2 scan tool is equipped with high-end ECU Coding functions consistent with the X431 series, specially designed to deal with the following scenarios:
• When you replace a damaged part or actuator, this function can generate and register a unique code for the new part to ensure that the ECU accurately recognizes and activates the new part.
• It promotes smooth communication between vehicle systems, allowing actuators to respond quickly and work together.
• You can also use ECU coding to flash potential vehicle functions or disable certain inconvenient functions according to your preferences to improve driving pleasure.
All Reset Services
PS: Functions vary by car models and years, please check the compatibility first.
1.EPB Reset (Electronic Parking Brake Reset) : After replacing the brake pads, you need to reset the position of the brake pads before installing the new brake pads to close the warning light.
2.Oil Lamp Reset : Close the oil service light, reset service mileage & service interval after replacing the engine oil, and the next maintenance calculation cycle is entered.
3.SAS Reset (Steering Angle Calibration Reset) : Learn to correct the angle and solve the problem of the steering angle of the steering wheel.
4.BMS Reset (Battery Register / Battery Maintenance) : Use the power management system, the battery needs to be re-matched after the battery is replaced, so that the car computer can recognize the new battery.
5.ABS Brake Bleeding : When changing a new brake fluid, there is a high possibility that air will enter the brake fluid pipeline. In the traditional way, one person steps on the brake and another person changes the operating fluid. This function can perform the brake operation, and only one person is required to change the brake fluid.
6.SUS Reset (Suspension) : This function needs to be performed to level the body height sensor in the air suspension system when the body height sensor and the control module or the car is leveled incorrectly.
7.TPMS Reset (Tire Pressure Monitor System Reset) : When replacing TPMS sensors or the signal from the sensor is lost it can quickly look up the tire sensor from the vehicle’s ECU, reset tire pressure and turn off the tire pressure MIL.
8.GEAR Reset (Gear Learning) : The vehicle has a crankshaft position sensor. This sensor collects the 58-tooth signal of the flywheel to determine the top dead center ignition time of a cylinder (reference signal). If this sensor is replaced, the reference will be lost, and gear signal learning is necessary.
9.Injector Reset (Injector Coding) : The engine injector has a code. After replacement, you need to write a new code into the computer so that the car computer can correctly identify the injector.
10.AFS Reset (Adaptive Frontlighting System) : It can detects the ambient light and then decides whether to turn on the headlights automatically. It can also adjust the headlights in time by monitoring the speed of the vehicle and the posture of the body.
11.Intelligent Cruise Control, 12.Engine Power Balance Moonitoring, 13.Motor Angle Calibration, 14. Head Light Fitting, 15.Seat Matching/Calibration, 16.Door and Window Initialization Study/Calibration, 17.Sunroof Initialization, 18.Air Suspension Matching, 19.Gearbox Matching, 20.Injector Calibration, 21.Multimedia Video Reset, 22.Cluster Reset, 23.Tire Change Reset, 25.Coolant Bleed, 26.NOx Sensor Reset, 27.Stop/Start Reset, 28.Transport Mode, 29.Adblue Reset, 30.A/F, 31.A/C Relearn, more and more function will be kept growing and optimized constantly.
Automatic VIN SCAN AND DTC LOOKUP
AUNCH Creader Elite V2.0 for Hyundai Kia scanner integrates advanced automatic VIN scanning technology, which can quickly identify the vehicle's specific information, such as manufacturer, production year and model, eliminating the tedious steps of manual entry. (Please note that the availability of the automatic VIN recognition function varies from vehicle to vehicle and depends on whether the VIN has been entered into the vehicle's electronic control unit. If this function is not applicable, you can select the “Diagnosis > Manual Search” path to continue vehicle diagnosis and service.)
In addition, the scanner has a rich DTC (diagnostic trouble code) database built in, making it easy to query and understand the fault code, eliminating the need to spend time searching one by one on the Internet, which significantly improves diagnostic efficiency.
4-IN-1 Live Data
LAUNCH Creader Elite V2.0 for Hyundai Kia Scanner can combine multiple graphs in one page, allowing you to see what happened at what time and in relation to other things you are interested in. Select the items you want (up to 4 items can be selected at the same time), and the screen will immediately display the waveforms corresponding to these items.
Health report and sharing
Generate a health report containing all detection modules with one click, and support printing or sending it to customers via the network, promoting service transparency and customer trust building
Diagnostic history
Detailed record of each diagnostic session, users can quickly review past test results, or continue to work based on historical data without repeating steps, improving efficiency.
and more …
Packing List
