British Pound Sterling (£)
Canadian Dollar (CA$)
Euro (€)
Nigerian Naira (₦)
US Dollar ($)
FOXWELL SD101 PRO Smoke Machine Car Smoke Leak Detector for Motorcycle Built-in Air Pump Evap System Test Diagnostic Tool
Foxwell SD101 PRO Introduction:
FOXWELL SD101 PRO is an entry-level pipeline leak detection tool. It can quickly and accurately locate leaks in any pipeline system, help technicians and automotive users quickly solve problems, and reduce diagnostic time.
What Can Foxwell SD101 PRO Do?
You will be able to Accurately detect the location of the leak, when you encounter the following situation.
-Frequent refilling oil/coolant
-Smell something weird
-Spot Strange Fluid or Spots
-Engine running too hot
-Car dashboard lights up
Foxwell SD101 PRO Main Selling Points？
1. Built-in Air Pump: Engineered for ease, ST101 Pro eliminates the need for external gas sources, offering swift setup and immediate functionality. The built-in pump ensures efficient operation while enhancing portability, allowing you to effortlessly move the smoke tester automotive wherever it’s needed.
2. Two Working Modes (Smoke Mode & Air Mode): When you opt for the air mode, the flow meter helps you swiftly confirm if there’s a leak. After that, switch to the smoke mode to pinpoint exactly where the leak is happening. This significantly boosts diagnostic efficiency and prevents the wastage of a large amount of smoke fluid, saving costs.
3. Adjustable Smoke Volume: Adjust the smoke volume according to the characteristics of the system to avoid potential damage to the measured system.
4. A Must-have Flow Meter: Check out the float in the flow meter to see if there’s any change – that helps confirm if there’s a leak. Plus, it lets you figure out how big the leak is, down to the millimeter. Twist the knob a bit, and you can keep the smoke and air flow just right, meeting the testing needs of different car systems.
5. Use Frequency Conversion Technology: high temperature protection, no need to stop and wait, can be normally detected. In addition, reduce the power of the whole machine, reduce the consumption of battery power
6. User-Centric Design: The ST101 Pro breaks away from traditional aesthetics with its streamlined design, steering clear of sharp edges that could scratch the skin or vehicle surface. Its unique horizontal liquid level window allows for precise pouring of smoke fluid. Different colored indicator lights make it easy to quickly identify the current operating mode. There are even more designs that prioritize the user’s experience.
7. Energy Saving and High Efficiency: no need for high-power battery, no need for too much soot, can also produce thick smoke. No need to preheat, compared with other similar products, smoke faster, thicker, no need to wait.
8.Precision Testing for Sensitive System: Providing a low pressure of 0.5 PSI, perfect evap smoke machine leak tester. it’s ideally suited for precision-demanding, more sensitive systems with smaller pressure requirements, such as EVAP systems, vacuum systems, and more. Ensure testing the automotive systems under simulated normal operational conditions.
Support Multi-system Test
EVAP System Test
Intake System Test
Exhaust Systems Test
Crankcase system test
Car Sealing Test
Fuel Tank System Test
Turbo System Test
Various Pipe Fittings Test
EVAP System Test
Leakage of the fuel evaporation system will cause fuel vapor to leak into the atmosphere, causing waste and pollution or unstable engine idling.
Built-in Air Pump
Engineered for ease, ST101 Pro eliminates the need for external gas sources, offering swift setup and immediate functionality. The built-in pump ensures efficient operation while enhancing portability, allowing you to effortlessly move the smoke tester automotive wherever it’s needed
New Smoking Technology
Low power consumption
Compared with the old smoke generation technology, the new smoke generation device has lower energy consumption, and the power consumption is reduced by about 30%.
Low temperature rise
The new patented structure slows down the temperature rise of the smoke chamber, and the temperature rise rate of the new structure is reduced by more than 40% under the same working time.
Low fuel consumption
The new patented smoke generation technology improves the efficiency of smoke generation, and the consumption of smoke oil is only about 3ml in the case of 10 minutes of work.
Wide Range of Applications
How To Use It?
1. Inject 10ml-20ml of test oil into the smoke leak detector, filling 20ML of test fluid, under standard working conditions, can be used continuously for about 10 minutes; (about Smoke Oil: advise use the Baby oil)
2. Open the pipe that needs to be connected with the leak detector.
3. Install the airbag adapter into the sealed pipe and connect the device to the smoke conduit.
4. Connect the leak detector to the DC12V battery and the device will start working. NOTE: red clamp tp positive(+), and black clamp to negative(-)
5. The pipe will be filled with smoke and the leakage point will be checked.
6. Test the leaking pipeline, under the premise of sealing accurately, generally about 1 minute can be filled with smoke, if there is a leak, within 3 minutes, you can observe the results.
package list
