British Pound Sterling (£)
Canadian Dollar (CA$)
Euro (€)
Nigerian Naira (₦)
US Dollar ($)
Must Read Before Buying：
1.100% original LAUNCH Authorized Store, support 5 years Warranty and lifetime free technical Support.
2..Lifetime free to use and 2 years free update
3.X41 Pro V5.0 has 2 versions:
>EU version: it has the IP limit and only can be used in European area, such as the Spain,France,Poland,Russia,UK…….
>Golobal version: it has no IP limit and can be used in all country and all area.
OE-Level All System Diagnostics:
Read/erase codes,view live data….all systems including ECM, TCM, ABS, SRS, BCM, BMS, TPMS, SAS
Active Test+ECU Coding+ Advanced Funtion:
1.Online Coding
2.Offline Coding:
3.Component Matching
4….
Audi /VW firmware protection cancel features：
One feature most techs really want is to remove firmware protection from their cars
ADAS Calibration:
Compatible with LAUNCH X431 ADAS Mobile to calibrate advanced driver-assistance systems, such as ACC, AEB, and more.
(PMI) Module Installation：
LAUNCH X431 V Pro 5.0 Elite Support PMI function, Compatible with Ford /Lincoin/ Mazda etc
Power Balance Test :
Cylinder power balance testing can help uncover hidden engine issues related to engine misfires…..
37+Reset:
1.O-il Lamp Reset Service:
2.EPB Reset:
3.BAT battery service(BMS)BMS Reset
4….
CAN FD & DOIP+FCA SGW….99% Vehicel Coverage
All in One Diagnostic Tool,200000+ Vehicles Supported & 200+ Car Makers +CANFD &DOIP+FCA SGW + 25 languages + No IP restriction
2 Years Free Update:
you have 2 years free to update
OE-Level All System Diagnostics:
Read/erase codes,view live data,retrieve ECU version information.It performs active testing and service functions on all systems including ECM, TCM, ABS, SRS, BCM, BMS, TPMS, SAS, f uel system, lighting system and A/C system.The functions cover up to 200,000 models worldwide.
1.Online Coding: this LAUNCH scan tool can directly access the online vehicle repair data to do high-level repairs.
2.Offline Coding: read the code from the original module, and then write the code for the new module,for example ,write a VIN to new ECU.
3.Component Matching.Matching,relearn ,Calibration, or initialization adaptive data for certain components after repair or replacements,such as: suspension calibration ,seat matching ,sunroof initialization,gearbox matching,injector calibration, transmission adaption.Delete Adaptation Data, Tank Calibration,Height sensor system calibration,PSM Sensor Calibration ,etc.
4.Retrofit/Modification, for example, retrofit battery with different type, Upgrading the headlights, taillights, and interior lighting to LED lights,etc.
5.Enable the hidden features. for example,disable auto start-stop, disable daytime running light, disable safety belt chiming ,delete transport mode .delete transmission adaptive value.setting speed limits,etc.***All above are not available for some specific car models. Reach us for details.
Audi /VW firmware protection cancel features:One feature most techs really want is to remove firmware protection from their cars. This feature helps mechanics replace car parts. Carry out car modifications
3000+ Active Tests: The Car Diagnostic Tool XLAUNCH X431 V Pro 5.0 features Bi-directional Control, also known as Active Test, Actuator Test, and Inspection Tests. It can send the commands to ECUs, read the ECU data to determine the completeness of the system or parts, and monitor the operation of the actuators,letting you quickly know if a specific system, component, or subsystem is functioning properly or not.
>>>Auto VIN Scan: 5 Ways for quick diagnose included 1.AUTO VIN SCAN 2. CAMERA VIN 3. Manually Input VIN 4. Select Area and Vehicle- Automatic Detection 5. Select Area and Vehicle-Manual Selection.
>>>ADAS Calibration: Compatible with LAUNCH X431 ADAS Mobile to calibrate advanced driver-assistance systems, such as ACC, AEB, and more. ADAS Calibrate a wide range of camera-based & radar-based driver assistance systems, Operate ADAS calibration to vehicle cameras, LKA system, ACC system, LDW system, and AVM system.
>>>(PMI) Module Installation : LAUNCH X431 V Pro 5.0 Elite Support PMI function, Compatible with Ford /Lincoin/ Mazda etc.This function is used when you need to replace a module (replace ECU) or i-nitialize a module.No need using the J2534 or buying a subscription
>>>Power Balance Test : Cylinder power balance testing can help uncover hidden engine issues related to engine misfires, lack of power or just a poor running engine, which is commonly missed with other tests. So, cylinder power balance testing, is one of the best and easiest ways to find the source of a engine misfire.
>>>Tons of Actuator Test (Functional Test) :Turn ON/OFF Front and Rear side ACM Solenoid , turning the f-uel pump on and off, cycling the a/c ,clutch on and off, Left clutch electromagnetic coil test,Acceleration Device Test（Vary by car, Hundreds of actuation test functions ）…>>>Cylinder Balance test/Cylinder leakage test/Cylinder Pressure …variations/Relative Compression Test >>>Read Hybrid Battery Cell Voltage: Identify any cells that may have lower or higher voltage than the others, indicating a potential issue that needs to be addressed,and ensure the efficient operation of the hybrid vehicle.
1> Oil Reset Service
This function enables you to reset the oil service for the engine oil life system,which calculates an optimal oil life change interval depending on the vehicle driving conditions and weather events.
lt needs to be performed in the following cases:
1. lf the service lamp is on, run car diagnostics first for troubleshooting.Afterthat, reset the driving mileage or driving time, so as to turn off the servicelamp and enable a new driving cycle.
2. lf the service lamp is not on, but you have changed the engine oil or electric
appliances that monitor oil life, you need to reset the service lamp.
2> Electronic Parking Brake Reset
This function enables you to reset the brake pad after replacing the brake pad.lt needs to be performed in the following cases:
1.The brake pad and brake pad wear sensor are replaced.
2.The brake pad indicator lamp is on.
3.The brake pad sensor circuit is short, which is recovered.4.The servo motor is replaced.
3> Steering Angle Calibration
This function enables you to reset the steering angle,after replacing thesteering angle position sensor,replacing steering mechanical parts (such assteering gearbox,steering column, end tie rod, steering knuckie), performingfour-wheel alignment, or recovering car body.
To reset the steering angle, first find the relative zero point position for thecar to drive in straight line. Taking this position as reference,the ECU cancalculate the accurate angle for left and right steering.
4> ABS Bleeding
This function allows you to perform various bi-directional tests to check theoperating conditions of Anti-lock Braking System(ABS).
lt needs to be performed in the following cases:
1. When the ABS contains air.
2. When the ABS computer, ABS pump, brake master cylinder, brake cylinder,brake line, or brake fluid is replaced.
5> Gear Learning
This function enables you to perform tooth learning for the car, to turn off the MIL.
lt needs to be performed in the following cases:
1. After the engine ECu, crankshaft position sensor, or crankshaft flywheel isreplaced.
2. The DTC 'tooth not learned' is present.
6> IMMo Service
This function enables you to perform the anti-theft key matching function, sothat the immobilizer control system on the car identifies and authorizes remotecontrol keys to normally use the car.
lt needs to be performed in the following cases:
When the ignition switch key, ignition switch,combined instrument panel,ECU,BCM, or remote control battery is replaced.
7> Injector Coding
This function enables you to write injector actual code or rewrite code inthe ECU to the injector code of the corresponding cylinder，so as to moreaccurately control or correct cylinder injection quantity.
lt needs to be performed in the following cases:
After the ECu or injector is replaced.
8> Battery Maintenance System Reset
This function enables you to perform a resetting operation on the monitoringunit of vehicle battery, in which the original low battery fault information will becleared and battery matching will be done.
lt needs to be performed in the following cases:1. The main battery is replaced.
2. The battery monitoring sensor is replaced.
9> Diesel Particulate Filter (DPF) Regeneration
This function enables you to clear PM(Particulate Matter) from the DPF filterthrough continuous combustion oxidation mode (such as high temperatureheating combustion,fuel additive or catalyst reduce PM ignition combustion)to stabilize the filter performance.
lt needs to be performed in the following cases:
1. The exhaust back pressure sensor is replaced.
2. The PM trap is removed or replaced.
3. The fuel additive nozzle is removed or replaced.
4. The catalytic oxidizer is removed or replaced.
5. The DPF regeneration MlL is on and maintenance is performed.
6. The DPF regeneration control module is replaced.
10> Electronic Throttle Position Reset
This function enables you to make initial settings to throttle actuators andreturns the learned values stored on ECU to the default state. Doing so canaccurately control the actions of regulating throttle (or idle engine) to adjust theamount of air intake.
11> Gearbox Matching
This function enables you to complete the gearbox self-learming to improvegear shifting quality.
lt needs to be performed in the following cases:When the gearbox is disassembled or repaired.
12> AFS (Adaptive Front-lighting System) Reset
This function enables you to initialize the adaptive headlamp system.
13> Sunroof Initialization
This function enables you to set the sunroof lock off,closed when it rains,sliding / tilting sunroof memory function, temperature threshold outside the caretc.
14> Suspension Calibration
This function enables you to adjust the height of the body.
lt needs to be performed in the following cases:
1. When replacing the body height sensor， or control module in the airsuspension system.
2. When the vehicle height is incorrect.
15> EGR Adaption
This function is used to learn the EGR(Exhaust Gas Recirculation) valve afterit is cleaned or replaced.
16> Seats Calibration
This function is applied to match the seats with memory function that arereplaced and repaired.
17> Tyre Reset
This function is used to set the size parameters of the modified or replacedtire.
18> Coolant Bleed
Use this function to activate the electronic water pump before venting thecooling system.
19> AdBlue Reset (Diesel Engine Exhaust Gas Filter)
After the diesel exhaust treatment fluid (car urea) is replaced or filled up, ureareset operation is required.
20> NOx Sensor Reset
NOx sensor is a sensor used to detect the content of nitrogen oxides (NOx) inengine exhaust. lf the NOx fault is re-initialized and the NOx catalytic converteris replaced, it is necessary to reset the catalytic converter learned value storedin the engine ECu.
21> Ac System Initialization
AC system releam/initialization must be performed when the vehicle AC ECUor actuator is replaced or the ECu memory is lost.
22> High Voltage Battery Detection
This function is used for high voltage battery diagnosis and status informationdetection.
23> Windows Calibration
This function is used to perform door window matching to recover the ECuinitial memory, and recover the automatic ascending and descending functionof power window.
24> Language Change
This function is used to change system language of vehicle center console.
25> AF Reset
This function is applied to set or learn airlfuel rate parameters.
26> Transport Mode
To lower vehicle power consumption, user may perform the following operations: limit vehicle speed, not wake up the network for door open anddisable remote key etc. In this case, deactivating transport mode is needed torecover vehicle being normal.
27> StoplStart Reset
This function is used to open or close the automatic StartStop function viasetting the hidden function in ECU (The precondition is vehicle equipped withhidden function and hardware support).
28> Intelligent Cruise Control System Reset
This function is used to matching the intelligent cruise control module after it isreplaced or repaired.
29> Engine Power Balance Monitoring
This function is used to monitor crankshaft acceleration in the power stroke ofeach cylinder, to determine the relative power provided by each cylinder.
30> Gas Particulate Filter (GPF) Regeneration
This function is used to perform the GPF replacement or regeneration after the fuel consumption is increased and engine output power is reduced resultingfrom a long time service of the GPF.
31> Motor Angle Calibration
This function is used to perform the motor angle calibration when the rotorposition detected by the motor angle position sensor is different from theactual rotor field position.
Support CAN FD & DoIP,99% Vehicel Coverage：
New CAN FD & DoIP Protocol Supporting
LAUNCH scanners are always connected with the needs of their customers.2024 Upgraded version of LAUNCH X431 V Pro 5.0 car scanner introduces new protocols CAN FD & DoIP to the vehicle diagnostic process for enhancing vehicle diagnostic speed and vehicle communication rate.
CAN FD(NO NEED Adapter) :standard in LAUNCH X431 V Pro 5.0 increases bit rate of up to 4 Mbit/s during payload transmission and processes greater quantities of diagnostic data, and saves both time and costs.
Compatible with GM/Chrysler Vehicles from 2020-2024 including Onix/Tracker/Cavalier/Encore/Suburban/Escalade/Escalade ESV /Electra E5/Tahoe/Yukon/Grand Cherokee/Grand Wagoneer/Montana/Silverado/Sierra…
DoIP (NEED Adapter): allows your LAUNCH pro v5.0 scanner to run a 100Mbit/s ultra-faster data transfer rates at a low hardware cost and achieve remote vehicle diagnostics capabilities in all ECUs connected to it. Compatible with BMW (F&G chassis), Volvo models (2018 later), Land Rover & Jaguar models (2017 later).
FCA Secure Gateway
LAUNCH X431 V Pro 5.0 automotive diagnostic scanner provides a trustworthy authority for technicians, car dealers, automotive engineers, and service shops to undo the SGW and perform all the necessary repair procedures.
Renault Security Gateway Function
Renault Security Gateway Function is used for release Renault’s gateway to perform service functions, active tests, coding, etc. without the need for a dongle or PC. With this feature, the car scan tool X431PRO3S+SMARTLINK HD allows you to pay to perform those functions via one-click on these models (after 2019), such as CLIO V, CAPTUR II, CAPTUR II CN, MEGANE IV ph2, ESPACE V ph2, TALISMAN/SM6 ph2, NEW ZOE, ARKANA CN, XM3/NEW ARKANA, NEW SANDERO/LOGAN, etc.
25 Languages Free to Use:
English, French, Spanish, German, Russian, Korean, Japanese, Portuguese, Italian, Polish, Dutch, Hungarian, Finnish, Simplified, Czech, Turkish, Greek, Arabic, Danish Persian, Romanian, Serbian, Swedish, Chinese Traditional.
All in One Diagnostic Tool,200000+ Vehicles Supported:
1)Widest Coverage:200000+ Vehicles Supported(from 1984-2024),200+ Car Makers Supported ! (Almost cars on the world)(Update car software to 2024, including cars, SUVs, minivans, 12v light-duty trucks,Hybrid vehicle,etc.):
>>Amarica Car Models—— Fit for FORD,LINCOIN,GM,BUICK,CADILLAC,CHEVROLET,CHRYSLER,DODGE,JEEP,HM
>>Europe Car Models—— Fit for BENZ,SMART,SPRINTER,BMW,VW,SKODA,AUDI,OPEL,LAMBORGHINI,PORSCHE,MAYBACH,EURO FORD,LANDROVER,DR,BENTLEY,RollsRoyce,ROVER,MINI,VAUXHALL,FERRARI,FIAT,Abarth,LANCIA,Alfa,Romeo,Maserati,BUGATTI,PEUGEOTCITROEN,
RENAULT,SAAB,VOLVO,OPEL,Dacia,SEAT
>>Asian Car Models ——Fit for SAMSUNG DAEWOO SSANYYONG HYUNDAI KIA HONDA Acura TOYOTA SCION LEXUSMAZDA NISSAN Infiniti JPISUZU TLISUZU DAIHATSUSUZUKI MITSUBISHI SUBARU CHANGCHENG HUACHEN ZHONGXING JACTY QIRUI_TY ISUZU JINLONG CHANGAN LIUWEI_TY XINKAI JPISUZU ZHONGSHUN HAOQING HAFEI XIALI CHANGHE ZHONGTAI Kowloon Brilliance LIFAN WEILI FLYER SSANGYONG JIAO WEILI LUXGEN BYD CHERY ZOTYE.etc
Malaysia Car Models——Fit for PERODUA(PERODUA),PROTON ; IRAN Car Models ——Fit for IKCO,MVM,SAIPA;Australian Car Models——Fit for Austford, Holden ;India Car Models ——Fit for TATA,MARUTI,MAHINDRA,India HM ;Russia Car Models—— Fit for GAZ, VAZ; Brazil Car Models——Fit for FIAT; GM; [CONTINUOUSLY GROWING Vehicle Coverage WITH UPDATES ]
2)2-Year Fre.e Online Update: No subscription fee! keep-up-to date with the newest technology and trends.. Only the official and original scan tool can get updated.
3)12-In-1 Live Data Stream Graphing&Export Data as CSV/PDF File: Provides very detailed data stream data, it could include the change of Accelerator Pedal Position Sensor , Actual Output Shaft Speed , Clutch A Actuator Motor , Vehicle Battery and so on. Graphical data allows you to analyze the data changes of each module more clearly and easily, and it is easier to see the problems in it,CSV/PDF file allow you save the data,easy to record and track the vehicle performance.
4)DTC Help & Google Search:Just one click “DTC Help”or Code Search”after the DTC shows, save time by putting one by one.
5)Remote Diagnosis &Feedback:When you encounter a complex car issue that is beyond your ability, you can easily get connected with an expert who is NOT physically present to help you fix it by using “Remote Diagnosis”. And if you have some difficulties or find some bugs during the use of this scan tool, you can send “Feedback” messages to LAUNCH technicians. They will handle the issues promptly.
6)Diagnostic Report Print&Share:With Launch X431 PRO V5.0,you can generate a full system Diagnostic Report by ONE-CLICK. The reports can be emailed to the office or directly to your customer. You can also print out the vehicle health report card.
7)V.A.G Guided Functions: for Audi, Volkswagen Skoda and Seat,etc : On-Screen Instruction step by step ,LAUNCH X431 PRO Automotive obd2 scanner guide you to be an expert in Car Diagnostics even you are a newbie. Thanks to this function , you don't need to reply on a mechanic’s suggestion all the time,and it is No Extra Cost for use.
8)View History:Once a vehicle diagnosis is performed, X431 PRO will record the every detail of the diagnostic process.you can record/review/playback live data anytime .The History function provides quick access to the tested vehicles and users can resume from the last operation, without the necessity of starting from scratch.
9)Maintenance Help:Including How-to Videos, operation skills, and user manual, Q&A, Quick start guide, etc.
10)Online Repair Resources , mainly including:Operating skills,DTC Help,Automotive Technology handbook, circuit diagrams of certain modules of some models, component introduction, fastener tightening specifications;Repair Case, repair cases of some car models. >>>Thanks to the LAUNCH X431 Pro V5.0 Elite Scan tool, you can get more repair orders and Improve your efficiency and professionalism , Having such a state-of-the-art ,Fast,Smart, Intelligent Bi-Directional Scanner, Which is a great investment in your life .
Try More Cool Functions with Our Original and 100,000+ ASE Certified Technician Endorsed LAUNCH X431 V Pro 5.0 Elite Elite Scanner
Extended Modules:
Not Only a Diagnostic Tool, but Also a Comprehensive Inspection Tool.NEW OPTIONAL FUNCTIONS: (You can perform more comprehensive vehicle inspections with LAUNCH X431 Pro V5.0 Elite,All are sold separately.
1.X-PROG 3:
(NEED EXTRA BUY)
2.TSGUN:
Activate and match with all 315 MHz / 433 MHz tire pressure sensors / Reset, relearn and tire pressure sensors fast /Diagnose the tire pressure issues and turn off the warning light by relearning and code your new tire pressure sensor./ LAUNCH LTR01 sensors AND other Unencrypted sensors with unlimited times./ Read tire pressure, tire temperature and battery status accurately
3.BST360 Battery Test clip Analyzer :
Used for Battery Cranking system Test, Battery Charging system Test, Battery Health Test.
4.Oscilloscope O2-2:
Make the auto repair technician quickly judge the faults on automotive electronic equipment and wiring.Featuring the user-friendly UI design combined with the unrivalled hardware specs, is able to measure and test virtually all the electrical and electronic components and circuits in any modern vehicles.
5 6 7 8 9 10
5.S2-2 Sensorbox: Specially designed to diagnose and simulator vehicle sensor faults quickly and conveniently.
6.S2-2 Multimeter: Measure the physical parameters such as voltage, resistance, frequency etc. It utilizes the same hardware as the S2-2 Sensorbox
7.X-431 ADAS Mobile/PRO: Operate ADAS calibration to vehicle cameras, LKA system, ACC system, LDW system, and AVM system.
8.VIDEOSCOPE: Examine and clean difficult-to-reach car areas normally hidden from sight, such as spark plug holes, engine cylinders, and small parts
9.Wi-Fi Printing: Print your diagnosis and maintenance report directly by selecting “Print via Wi-Fi”.
10.Mall service: Get more special function and advanced function.
Note:If you want to get this extra modules , just let us know ,we have all modules in stock .
What Comes With ALL-IN-ONE LAUNCH X431 V Pro 5.0 Elite Scanner ?
X431 Pro V5.0 Elite Host,DBSCAR VII connector,UK/EU/US Plug,HDB15F to HDB15F data cable,HD15M to OBDII 16 adaptor,Type-A to Type-C USB cable,Battery clamps cable,Fuse,Cigarette lighter cable,Storage Case,Password envelope,Quick start guide,User manual
12 Connectors :Benz-38,Benz-14,BMW-20,Chrysler-6,Ford-6+1,GM/VAZ-12,Honda-3,Kia-20,Mitsubishi/Hyundai-12+16,Toyota-17,Toyota-22,Nissan-14+16. ***Any Issue ,e mail or c a l l us directly : 323- 325-5773
