LAUNCH X431 X-PROG 3 Car Anti-theft Immobilizer and Key Programmer tool For X431 DIAUN V X431 PRO MINI/X431 V/X431 V PLUS/PAD V

Launch X431 G3 X-PROG 3 Immobilizer & Key Programmer

X-431 GIII X-PROG 3 advanced immobilizer & key programmer compatible with X-431 series diagnostic scanners can read and write keys to the vehicle. X-PROG 3 enables anti-theft type identification, remote control matching, key chip reading and matching, anti-theft password reading and anti-theft component replacement.

X431 X-PROG G3 Highlights:

● Ship From US/EU/UK/Russia/Brazil, fast delivery, Free tax !
● LAUNCH Official authorized dealer, 100% original
● Supported brands: for VW, for Audi, for Skoda, for Seat, for BMW, for Mercedes-Benz, for Mini and more continue to be updated.
● X-431 GIII X-PROG 3 advanced immobilizer & key programmer is a powerful chip reading device that can read and write keys to the vehicle.
● Supported models: 60+ brands in America, Europe and Asia.
● Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc. More models and systems continue to be updated.
● Compatible with Multiple X-431 Series Diagnostic Tablet (X-431 V, X-431 V+, X431 ProS, X431 Pro3s+, X-431 PAD V, X-431 PAD VII, Immo PAD, Immo Pro, Immo Plus, Immo Elite, X-DIAG Pro3 etc)

X431 X-PROG G3 Main Functions:

● Supports MQB
● Update for VAG MQB NEC35XX add key & all keys lost NEW!!!
● All-in-One Key Programmer. Integrates Multiple Function Models
Reads & Writes Most Engine/ Gearbox ECUs Without Disassembling the Shell
● Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.
● Supports for VW/ for AUDI MQB Platform Engine ECU Replacement or Cloning (Read engine ECU data directly from the key).
● Works with Reprogramming Device to Backup/ Restore Programming Data (For Bosch/Siemens engine ECU).
● X-PROG 3 enables reading and writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine INS code.
● X-PROG 3 enables anti-theft type identification, remote control matching, key chip reading and matching, anti-theft password reading and anti-theft component replacement.

Note

●You can buy MCU3 Adapter to do Benz All Keys Lost and ECU TCU Reading.
●To check detail X-PROG3 Immobilizer key programming list, check list on the official website: //qcar.x431.com/newqcar/carDes?lan=EN&swId=RESETPROG&page=1&type=3&serialName=Immo Program&area=RESET
●LAUNCH X431 X prog 3 Compatible with (X-prog 3 can't work alone) : X431 Diagun V , X431 PRO MINI , X431 PROS MINI, X431 V , X431 PRO3S+, X431 V+ , X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII

Update Notice:

New Software Update V10.80 (May 25th, 2023)

1. Added the key learning and instrument replacement functions for Johnson Control MQB instruments (including chips A2C81589600, A2C81589700, D70F3526, and D70F3529).
2. Added the key learning, all keys lost, and instrument replacement functions for Johnson control instruments as of year 2014
3. Added the instrument cloning function for VDO NEC 35XX MQB instruments (including chips A2C81 589600, A2C81 589700, D70F3526 and D70F3529)
4. Added the functions “All Keys Lost” and instrument replacement for the fourth-generation 35XX instruments.

Launch X431 GIII X-Prog 3 latest update for RESET PROG (V10.05) Function:

1) Added ECU reading and writing functions for 10 models of Siemens Engine including MSD80, MSD81, MSD85, MSD87, MSV90, SIM271DE, SIM271KE, SIMOS8.4, SIMOS8.5 and SIMOS8.6;
2) Added ECU reading and writing functions for 5 models of Transmission including 9G_Tronic, DQ380, AL551, AL450 and 8HPXX.

Compatible With Multiple X-431 Series Diagnostic Tablet:

X431-Throttle, X431-Throttle III, X431-Torque, X431-Torque III, X431-Turbo, X431-PAD II AE
X431 Pros, X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII

Launch X431 G-3 Functions

1. EEPROM read and write
2. MCU read and write
3. for Benz key
4. Key Simulator
5. for Volkswagen's fourth-generation instrument disassembly and reading are all lost
6. BENCH mode read engine
7. Boot mode read engine
8. for Volkswagen 4th generation free accounts are lost
9. Reading gearbox data
10. Reading and writing of keys
11. for BMW engine ISN code reading
12. for BMW CAS4+, FEM chip read and write
13. Reading and writing for Audi's fifth-generation steering column chip
14. OBD reads MED17 engine
15. for Volkswagen fourth-generation UDS engine replacement
16. for Volkswagen MQB engine, gearbox, steering column lock replacement
17. for Benz engine gearbox wipe empty function

X431 XPROG3 Core Functions

● Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.
● Supports for BMW CAS4/CAS4+ module replacement.
● Supports the ECU cloning and replacement for BMW Siemens engines.
● Supports ECU replacement for the fourth-generation for VW/for AUDI engine;
● Supports ECU replacement for the fifth-generation for VW/for AUDI Bosch and Siemens engines.
● Supports the all lost and replacement for the fourth generation for AUDI EZS, comfortable ECU, and KESSY IC.
● Erase the password for Mercedes-Benz engine and gearbox within 3S.
● Add the function of calculating the password for Mercedes-Benz key within 1 minute.
● Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.
● Supports common ECU/MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating.
● Supports ECU replacement for all lost without disassembly for VW/for AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).

X-431 GIII Supported Car Brands:

● Supported brands: for VW, for Audi, for Skoda, for Seat, for BMW, for Mercedes-Benz, for Mini and more continue to be updated.
● Supported models: 60+ brands in America, Europe and Asia. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc. More models and systems continue to be updated.

It supports mainstream manufacturers of common ECU MCUs, with more than 1,000 product models and continuous updates

Atmel NSC
Fujitsu Philips
Infineon Renesas M16
MC68HC05 Renesas M32
MC68HC08 Renesas M32R
MC68HC11 Renesas R32C
MC68HC12 Renesas R8C
MediaTek Renesas V850 SPI
MicroChip Renesas V850 UART
Nordic Samsung
ST SiLabs

Supported EEPROM Brands:

It supports common mainstream EEPROM manufacturers, with nearly 1,000 product models, and they are continuously being updated.

4Wire GI Numonyx SST
Adesto GigaDevice OKI ST
AKM Grundig ONSemi Toshiba
Altera HOLTEK Other Winbond
Amic Hynix PCT Xicor
Atmel I2C Philips xUSSR
BOSCH ITT Pioneer YMC
Catalyst KHIC PMC Spansion
Chingis Macronix Ramtron SPI
Dallas/Maxim MicroChip Rohm NEC
EON Micron Samsung NSC
ESMT MicroWire Seiko Ford
EXEL Mitsubishi Siemens Fujitsu
Fairchild Motorola Sony

X-prog3 ECU TCU Clone Function Only with high-end tablets (PAD5, PAD 7, PRO5, IMMO PLUS etc)

Launch XPROG3 Operation Connection:

Connection method 1: Directly connect to OBD16 for key matching, data reading and writing, etc

Connection method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the immobilizer programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host

Connection method 3: After removing the ECU from the car, connect the anti-theft ECU pin to the DIY slot of the immobilizer programmer through the cable to realize the data interaction between the anti-theft ECU and the diagnostic host.

LAUNCH X431 x-PROG 3 Specification :

Input Power: DC12V
Working CurrentMax: 500mA
Power Consumption: 5W
Storage Temperature: -20℃~70℃
Working Temperature: 0℃~50℃

LAUNCH X431 X prog 3 Supports Car List :

For Abarth, For Alfa Romeo, For Aston Martin, For Audi, For Bentley, For Bmw, For BriBmw, For Bugatti, For Chang An, For Chevrolet, For Citroen, For Dacia, For Dallara, For Dodge, For Ferrari, For Fiat, For Ford, For Freightliner, For Geely, For GMC, For Honda, For Hyundai, For Infiniti, For Isuzu, For Jaguar, For Jeep, For JMC, For Kia, For Lamborghini, For Lancia, For Land Rover, For Lincoln, For Mahindra, For Maserati, For McLaren, For Mercedes, For Mini, For Mitsubishi, For Nissan, For Opel, For Peugeot, For Porsche, For Renault, For Saab, For Seat, For Skoda, For Subaru, For Suzuki, For Toyota, For Vauxhall, For Volkswagen (VW), For Volvo, EEPROM

How to use X-PROG3 to read and write data?

Method 1: use main cable to connect car OBD2 16pin interface, and X-PROG3,with LAUNCH X431 Tablet to do key matching, data reading and writing, etc.

Method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the anti-theft matching programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host

Method 3: After removing the ECU from the car, connect the anti-theft ECU pin to the DIY slot of the anti-theft programmer through the cable to realize the data interaction between the anti-theft ECU and the diagnostic host

LAUNCH X431 x-PROG 3 Specification :

Input Power: DC12V
Working CurrentMax: 500mA
Power Consumption: 5W
Storage Temperature: -20℃~70℃
Working Temperature: 0℃~50℃